A Step by Step tutorial to help you learn “How To Draw a House in PicsArt” by using Brushes, Shapes and Colours etc.
Hello There! This is Daimary John and in this article, “Draw a House in PicsArt“. We will learn,
What is meant by “Drawing a House in PicsArt”?
“Drawing a House in PicsArt” simply means to make a drawing of a house by using various resources, such as Shapes, Colours etc, digitally.
You can basically draw or create your own image of a house in PicsArt Photo Studio.
Not only Houses, You can also draw Hut, Building etc. By using different Brushes and Shapes.
How to Draw a House in PicsArt?
In order to draw a house in PicsArt, Follow the Step by Step instructions provided below.
Step 1 : Open PicsArt Draw.
Step 2 : Go to “shapes” and select a parallelogram shape.
We will first be designing the roof of the house. We can do this by tilting the parallelogram in a certain angle, along with all the necessary adjustments such as the image provided below.
As you can see in the image above. The parallelogram shape has been stretched and tilted to meet the look of a house roof.
Step 3 : Draw a triangular shape on the left side of the previous shape.
Do make sure that the lines are well alingned. For easier drawing, you can zoom in to your drawing by pinching in, allowing you to work more precisely.
Step 4 : Draw another triangular shape. This time on the inside of the previous triangular shape.
As you can see in the image above. The second triangle sits just inside the other triangle. This step will make sure that the roof looks actually a roof.
Step 5 : Tap on the Eraser Tool and erase the bottom part of the triangle.
Now the drawing looks a lot more cleaner and it’s already starting to take it’s shape. Now our roof looks to be complete. So now let’s move to the walls of the house.
Step 6 : Draw a rectangular shape just a little above the bottom line of the roof, on the left hand side. And extend all the way towards the roof on the right hand side.
This step will ensure your house to look like the walls are under the roof. Just like the real houses.
Step 7 : Draw a Parallelogram shape on the other side as shown on the image below.
Again, you will have to tilt and do all the necessary adjustments to make your image look just like the one show above.
Step 8 : Erase all the unnecessary lines in the drawing by using the Eraser Tool.
Now we can start erasing all the unwanted lines in our drawing by using the Eraser Tool.
As you can see in the image above. Our house looks complete apart from just the door and a few windows which we can draw by the same method.
Step 9 : Draw a vertically rectangular shape on the left wall to draw a door.
We can also make the image look like as if the doors were open.
Do refer to the image above for further information.
Step 10 : Repeat the same method mentioned on “Step 9” for drawing the windows.
Use parallelogram shapes to design your windows. And if you would be drawing two windows, remember to align them perfectly.
There we go. We have successfully Drawn a house in PicsArt Photo Studio by using Shapes.
Alternatively, apart from just the drawing. We can also paint the drawing by using the same method as to draw the house.
As you can see in the image above. I’ve paint or filled the house with colours. I used the same shapes that I used to create the house. All you have to do is change the fill settings from “Stroke” to “Fill” under shapes.
Well, this was all in this post Drawing a House in PicsArt. I hope this tutorial to be the one you were looking for. If you have any questions, feel free to comment down below.
If you want to increase your knowledge over PicsArt. You can read and learn more through the following links provided below.
Thank you very much for reading this post.